Multiple Input Multiple Output Slot Antenna Design With -22 Db Isolation Without Decoupling Structure For Application On Ultra Wide Band
DOI:
https://doi.org/10.62671/jowim.v1i2.53Keywords:
antenna slot, ultra wideband, Multiple input multiple outputAbstract
Technology that is always evolving requires us to always make the latest innovations, one of which is in the field of telecommunications. Currently, multiple input multiple output (MIMO) technology is widely used in ultra wideband (UWB) systems to overcome the effects of multipath fading. Multiple antennas are used to increase channel capacity. Two-element MIMO UWB systems have several techniques for obtaining good isolation between antenna elements. In this final project, the design and analysis of the change of a single UWB slot antenna into a 2-element MIMO UWB antenna is carried out by placing the antenna elements asymmetrically to get high antenna isolation. The proposed UWB MIMO antenna has a very compact size of 42×25 mm2. The fed slot microstrip antenna acts as a single UWB antenna element. Antenna design using CST Study Suite software. In the simulation results, a single UWB slot antenna that is modified into a UWB MIMO antenna has a return loss of -28 dB, a bandwidth of 7.2514 GHz, isolation below -20 dB, a VSWR of VSWR 2 in the frequency range of 3.7002 GHz to 9.6546 GHz, the gain reaches 3.2 dBi, and radiation pattern which is quasi omnidirectional.
Downloads
References
Dirton, P. 2014. "Design and Build a Rectifier Antenna for Electromagnetic Energy Harvester at Gsm Frequency of 1800 Mhz". Thesis.Electrical Engineering, Faculty of Engineering, University of Brawijaya.
Faizal, WN. 2019. "Microstrip Massive MIMO Antenna Design for Base Transceiver Station (BTS) Applications
th generation (5G)". Final Project. Electrical Engineering FTE ITSN.
Gunjan, S. 2016. “Compact MIMO Slot Antenna for UWB Application”. IEEE Antennas and Wireless Propagation Letters, 16 (15): 1057-1060.
Heri, R. 2009. "Design and Build an 8-Element Triangular Slot Microstrip Antenna with Indirect Feed Line Microstrip Enumeration for Wimax Cpe Applications". Thesis. Electrical Engineering FT UI.
Nurfitriani. 2018. "Effect of Feeder Dimension on Square Patch Microstrip Antenna for DBS Ku-Band". SENIATI- National Institute of Malang, 18: 309-314.
Rachmad N and Aini N.2011." Design and Build a Microstrip Antenna for Video Signal Receiver on Unmanned Aircraft". ICT Journal, 11 (6): 8-16.
Yan Z dan Bingjian N.2014. “Compact Ultrawideband (UWB) Slot Antena with Wideband and High Isolation for MIMO Applications”. Program In Electromagnetics Research C, 14(54):9-16.
Dwi, A.2017." Design and Build a 3-Element Linear Array Triangular Patch Microstrip Antenna as a Transmitter for Wireless CCTV (Closed Circuit Television) Camera Applications at 2.4 GHz Frequency". Thesis. Telecommunication Engineering, Department of Electrical Engineering, PNJ.
Chandra, J. dkk. 2016.” Compact UWB MIMO Slot Antenna with Defected Ground Structure”. ARPN Journal of Engineering and Applied Sciences, 11(17):10487-10495.
Yanjie,W. dkk. 2018.”Design of a Compact UWB MIMO Antenna without Decoupling Structure”. Hindawi International Journal of Antennas and Propagation, 18(18):1-7.
Qureshi . dkk. 2011. “Peformance Analysis of FR-4 Substrate for High Frequency Microstrip Antennas”. ResearchGate, 11(8):1-4.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Nadilla Marselina, Uzma Septima, Amelia Yolanda, Yustini (Author)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
